Heavy Duty Double Sided Mounting Tape for Automotive and Home Decor

About this item

• APPLICATIONS: Very high bonding (0.8mm/0.031" thick) strength can withstand moderate to heavy mounting objects; it is safe and extremely reliable on smooth surfaces that this tape is widely used for LED strip lights, trims, car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations.
• PRODUCT FEATURES: A double coated pressure sensitive adhesive and suitable for wide variety of substrates including lower surface energy materials and smooth surfaces, such power coated paints, glass, marble, plastic, tile, wood and lamination; but not good to heavy textured surfaces and painted walls (taken off paints while removal). Excellent temperature resistance, water moisture resistance, permanent and industrial strength.
• PRETREATMENT GUIDELINES: For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
• INSTALLATION: Clean and dry surface first, wipe with ADHESION PROMOTER (ASIN: B098747W2K) if some surface does not work well, apply the tape to objects (warm up the adhesive if weather is too cold) and let it cure for 12 hours then stick to the walls with pressure, "X" shape needed at center for big objects. The longer time applied the stronger the tape will be molding into surfaces of objects.
• PEEL OFF BACKING & TAPE REMOVAL: Use nail or a knife to cut out the backing film a little bit or pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal of backing. Refer to the instruction or contact us for more details. Remove the tape with adhesive remover, spray the adhesive remover around the bonding surface, scrap the tape and residue with plastic scrapper for a neat removal.